DALI statīvā montējams mājas audio pastiprinātājs PHANTOM CI AMP-4750 DSP

The DALI PHANTOM CI AMP-4750 DSP is a powerful Class-D, rack-mountable, custom installation amplifier. Featuring advanced, integrated digital signal processing and speaker presets, this 4x 750 watt powerhouse brings out the very best in any DALI PHANTOM home theatre or multi-room installation. And with Wi-Fi/LAN connectivity and a web-based configurator, even complex setups are made simple.

Specifications

Frequency range: 12 Hz – 20 kHz
(+/- 1 dB, 8 Ω load, 3 dB below rated power)
Connection input(s): 4 × Analogue unbalanced, RCA
4 × Analogue balanced, Euroblock connector
1 × S/PDIF, RCA
Output channels: 4 × Lo-Z loudspeaker (4 – 16 Ohm)
2 × Hi-Z loudspeaker (70 V / 100 V)
1 × S/PDIF digital out, RCA
Maximum speaker cable cross section: 2,5 mm2 / AWG 14 (Euroblock standard)
Output power @ 4 Ohm: 4 × 750 W (SE)*
2 × 1500 W (BTL)**
Output power @ 8 Ohm: 4 × 400 W (SE)
2 × 1500 W (BTL)
Output power @ 70 V: 2 × 1200 W (BTL)
Output power @ 100 V: 2 × 1500 W (BTL)
Total system power: 3000 W
Power consumption: 1100 W
Output voltage: SE: 85 Vp / 170 Vpp (unloaded)
BTL: 170 Vp / 340 Vpp (unloaded)
70/100 V (Hi-Z)
Output circuitry: UMAC™ Class D.
Full bandwidth PWM modulator with ultra-low distortion
Signal to noise-ratio: >106 dB
(A-weighted, 20 Hz – 20 kHz, 8 Ω load)
THD+N (typical): < 0.05 %
(20 Hz – 20 kHz, 8 Ω load, 3 dB below rated power)
Other features: Short circuit protection
DC protection
Undervoltage protection
Temperature protection
Overload protection
Rack mountable
Power supply: UREC™ universal mains switch mode power supply with Power Factor Correction (PFC) and
standby converter
Operating temperature: 0 – 40° C
Operating voltage/ frequency: Universal mains
100 V – 240 V, 50 – 60 Hz
Power ratings: 1 % THD @ 120 VAC and 230 VAC
Standby consumption: < 0.5 W
Outer dimensions (H x W x D): 88 × 440 × 332 mm
3.50 × 17.30 × 13.10 inches
Weight: 7.22 kg
Shipping weight: 9.34 kg

Package Contents: DALI PHANTOM CI AMP-4750 DSP, Satin Black; x2 Two channel balanced input connector; x2 Two channel output connector; x1 GPIO socket connector; x1 Mains power cable; x4 Adhesive rubber feet; Manual.